JTAG Pinouts and Cables – Etoolsmiths https://www.etoolsmiths.com JTAG Boundary Scan | Test Products | Engineering Services Wed, 12 Aug 2015 07:40:47 +0000 en-US hourly 1 Connector Vendors https://www.etoolsmiths.com/connector-vendors/ https://www.etoolsmiths.com/connector-vendors/#respond Mon, 11 Aug 2014 01:06:19 +0000 https://www.etoolsmiths.com/?p=2728   This page provides background on JTAG cables and connectors along with links to common JTAG connector vendors. You can also visit our Pin-outs pages for more information about the signals and pin-outs commonly used. Testing, programming or debugging a system via JTAG requires access to at least the 4 core signals used for communication between […]

The post Connector Vendors appeared first on Etoolsmiths.

]]> https://www.etoolsmiths.com/connector-vendors/feed/ 0 ARM JTAG Pinout https://www.etoolsmiths.com/arm-jtag-pinout/ https://www.etoolsmiths.com/arm-jtag-pinout/#respond Thu, 27 Jan 2011 06:05:25 +0000 https://www.etoolsmiths.com/?p=1013 This page contains information on the commonly used connectors and pin outs for JTAG Boundary Scan testing and debug of hardware employing the ARM family of processors. If you do not see the pin out you are looking for, please request it in the comments section. ARM 20 Pin Connector Pin Out This is a header commonly […]

The post ARM JTAG Pinout appeared first on Etoolsmiths.

]]> https://www.etoolsmiths.com/arm-jtag-pinout/feed/ 0 JTAG Pinout FPGA https://www.etoolsmiths.com/jtag-pinout-fpga/ https://www.etoolsmiths.com/jtag-pinout-fpga/#respond Tue, 21 Jul 2009 06:26:26 +0000 https://www.etoolsmiths.com/?p=317 JTAG  Field Programmable Gate Array (FPGA) Pin out – “Standard (CES)” This standard configuration is typically used for FPGA (such as Xilinx) JTAG programming adapters. You can create a pinout to use our JTAG system using the description below. Pin Number                Signal name                  Signal Description 1                                      TCK                                   Test Clock Signal 2                                    Ground                             Ground 3                                    TDI                                     […]

The post JTAG Pinout FPGA appeared first on Etoolsmiths.

]]> https://www.etoolsmiths.com/jtag-pinout-fpga/feed/ 0 JTAG Pinouts and Connectors for PowerPC https://www.etoolsmiths.com/jtag-pinouts-and-connectors-for-powerpc/ https://www.etoolsmiths.com/jtag-pinouts-and-connectors-for-powerpc/#respond Tue, 09 Jun 2009 04:00:01 +0000 https://www.etoolsmiths.com/?p=286 This page contains details on PowerPC JTAG Connector Pinouts. These Pinouts can be used to interface a JTAG ICE or Boundary Scan test Device to your PowerPC board PowerPC 52XX, 74XX, 7XX, 82XX, 83XX, 85XX JTAG Pin Signal Name 1 1  TDO JTAG Test Data Out 2 2 Not Used (QACK -7XX only) 3 3 […]

The post JTAG Pinouts and Connectors for PowerPC appeared first on Etoolsmiths.

]]> https://www.etoolsmiths.com/jtag-pinouts-and-connectors-for-powerpc/feed/ 0 JTAG Pinout Altera ByteBlaster II https://www.etoolsmiths.com/jtag-pinout-altera-byteblaster-ii/ https://www.etoolsmiths.com/jtag-pinout-altera-byteblaster-ii/#respond Tue, 09 Jun 2009 01:27:39 +0000 https://www.etoolsmiths.com/?p=263 The Altera ByteBlaster II pin out is shown below. The JTAG signal are show along with there pin numbers. Our XJLink JTAG controller hardware fully supports this pin out as well as many other standard programming and confoiguration cabled. Since our  XJLink controller can replace the BYteBlaster II cable For additional information on the cable, […]

The post JTAG Pinout Altera ByteBlaster II appeared first on Etoolsmiths.

]]> https://www.etoolsmiths.com/jtag-pinout-altera-byteblaster-ii/feed/ 0